Browsed by
Tag: construction

Schornsteinsanierungs Guidelines

Schornsteinsanierungs Guidelines

The 1 x 1 of chimney renovation: alarm signals realize everyone of a chimney has must deal sooner or later with the theme of a fireplace renovation. Click here has plenty of information regarding this issue. But how do you know that a private fireplace must be rehabilitated and especially when? Ahrens tells you which alarm signals to detect and then what steps are. Fireplace renovation may be necessary for the most diverse reasons. On the one hand, this is a new heating system, the environment, should work without deficits and particularly energy-saving. This boiler and chimney must be matched perfectly. Educate yourself even more with thoughts from Jim Donovan Goldman Sachs. Existing installations it may lead to the chimney due to lack of quality must be replaced or rehabilitated. But what evidence is there for? Respond at first sign of today’s heating plants burn fuel at lower exhaust temperatures as old plants do.

Not refurbished fireplaces can occur in the soot. This means that the water vapour contained in the exhaust gases condenses and soaked the fireplace. Visible is this unpleasant condensation stains that occur in cool areas on the attic or upper floors. Condensate exits at the sweeping door are also available. To avoid this effect, should the fireplace with be rehabilitated at a boiler replacement. An apparently desolate chimney CAP, smell of smoke, or even smoke in the living room, in addition represent important alarm signals of, which in time should respond to. Erosion of masonry in the Interior, porous plaster due to condensate damage and chipping of material pipe chimney systems among characteristics that are may not be apparent at first glance. Especially among difficult visible signals, the homeowner is often overwhelmed.

A chimney restoration specialist is needed here. Customers recognize the importance of the topic more and more frequently and more quickly and respond in a timely manner. And they trust in many cases on the market leader Ahrens. Not in vain we must appreciate more than 200,000 refurbished chimneys”, noticed the commercial Managing Director, Bmst ing. Edmund Drohojowski, a change in values in society.

Western European

Western European

If you're going to do paving laying their hands then we must first decide its choice and quality. How to tell the professionals to recognize the quality of tiles or paving stones on her appearance usual consumer is almost impossible – because the quality of the paving stone blocks (as well as the quality of any products made of concrete), can be studied only with special equipment. Therefore, the consumer is difficult question: "How to avoid purchasing low quality goods?". We believe that the answer to this question may serve the following tips bona fide manufacturers: The mirror surface of the tiles is achieved by introducing special additives into the concrete, any additional water. Moreover, if the additives improve the concrete, the water – the enemy of good blocks. Poor paving may look smooth, but it will not be strong, as is made with excess water. It is noticed that high-quality paving slabs under impact of one of the other issues 'ringing' sound, whereas the 'watery' – dull. The choice of paving slabs.

The quality of paving (paving). Good can be paving a bright, saturated colors. But in this case, the production should be used only imported pigments in strictly defined proportions. Over-saturation of color can tell the consumer about overdose of a dye that is bound to affect the strength characteristics of the tiles. High-quality paving, manufactured on special equipment from quality materials that can not be cheap. As a rule, cheap paving tiles offer small producers who do not have sufficient material and technical base, and use the helper does not always conform to the requirements specification, material.

When ordering, road cover not too lazy to inquire about the manufacturer, how long he works in the market if the product quality certification. By the way, getting paving tiles, no harm will know the following "truths": It should be seriously to the calculation of the number of tiles needed for the paving of the surface, so as to buy the exact same tile will be very problematic. Typically, the products from the same manufacturer but from different parties – different from each other in tone (and sometimes the size). In the game, paving slabs, even the highest quality may contain defective material. European (EM) and international (130) standards allow the presence of 5% defective tiles on consignment. The total area of the tiles should be ordered approximately 7-10% larger than the area is coated surface. This is because some of the tiles have to be disposed in the trim blocks. The number of 'excess' tile depends not only on the shape and size is coated surface, but also on the method of laying a sidewalk coverage (eg, diagonal or circular laying waste, as a rule, more than in parallel). By the way, after the tiling is not amiss to keep a dozen spare tiles – just in case. In most Western European countries, per capita have more than 1-5 m packed paving slabs. In Ukraine, this figure is significantly less than 1 m per person. So that the Ukrainian market concrete paving stones has pretty good growth prospects. Besides, the city government, and private landlords have appreciate the benefits that provides pedestrian amenities and parks with paving slabs.